The Construction Of A Standard Classroom Chair And Bench

THE CONSTRUCTION OF A STANDARD CLASSROOM CHAIR AND BENCH

• Format: Ms Word Document| Pages: 85 | Price: N 3,000| Chapters: 1-5
• Get Complete Project Material(s) Now! »

Abstract

This project work construction of classroom Chairs and Benches has been carefully written to cover the whole procedures involve in the construction, ranging from conversion of timber to the application of finishes to the completed work. Chapter one deals with the introduction to the project, aim and objectives and scope of study. Chapter two contains the preparation of timber, conversion of timber, seasoning of timber, and preservation of timber. Chapter three is written to contain the method of construction, machines and tools, general safety precautions for machine tools, design of the project, construction techniques and selection of materials, joint used in the construction, cutting list, construction of the project and assemblage. The finishes applied to the wood work is contained in chapter four while chapter five contains recommendation and conclusion

Table of Content

Title Page………………………………………………………………..…i
Certification.…………………………………………………………….…ii
Dedication……………………………………………………………….iii
Acknowledgement…………………………………………………..…..iv
Table of contents………………………………………….……………..v
Abstract……………………………………………………..………….vii
CHAPTER ONE
1.0 Introduction…………………………………………….……………1
1.1 Aims and Objectives.. ……………………………………………2
1.2 Scope of Study ……………………………………………….…….3
1.3 Limitation…………………………………………………………3
CHAPTER TWO
2.0 Literature Review…………………………………………..……..5
2.1 preparation of timber………………………………………..…….5
2.2 Materials used for construction ……………………………….……5
2.3 Classification of Woods…………………………………………..5
2.4 Classification of Some Timber………………..…………………….7
2.4.1 Structure of Timber ……………………………………………….8
2.4.2 Types of Timber …………………………………………….…….9
2.4.3 Defects in Timber before Construction ……………………………10
2.5 Seasoning of Timber ………………………………….…………..11
2.5.1 Air seasoning………………………………………………..……12
2.5.2 Kiln seasoning…………………………………………………13
2.6 Merit and Demerit of Timber……………………….……….…13
2.7 Preparation of Timber………………………………………….14
2.8 Conversion of Timber …………………………………………….14
2.8.1 Method of Conversion ……………………………………………14.
2.8.2 Treatment of Timber …………………………………………..16
2.8.3 Preservation of Timber…………………………………………18
CHAPTER THREE
3.0 Methodology…………………………………………………….21
3.1 Choice of Timber………………………………………………….22
3.2 Description of materials used for the design of the project ……..23
3.3 Glue………………………………………………………………..23
3.4 Terms Associated with Glue ……………………….……………..24
3.5 Machine, tools and their application……………………………..25
3.6 Diagrams of Tools used for the project …………………………..29
3.7 Construction Techniques……………………………………….31

CHAPTER FOUR
4.0 Joint s ………………………………………………………………32
4.1 preparation of Joint ………………………………………….….33
4.2 Assembly of Joints………………………………………….…….33
4. 3 Preparation of the surface of the project …………………………34
4.4 Finishing………………………………………………………34
4.5 Application of finishing …………………………………………35
4.6 Preparation of Bill of Engineering Measurement and Evaluation (BEME) f or the project………………………………………………35
CHAPTER FIVE
5.0 Conclusion and Recommendation ……………………………….37
5.1 Conclusion……………………………………………….………..37
5.2 Recommendation…………………………………………………..37
References ………………………………………………….……..39