Category: AEROSPACE ENGINEERING
Format: a:2:{s:5:"value";s:7:"Ms Word";s:5:"label";s:7:"Ms Word";} |
Pages: 100 |
Price: ₦5,000 |
Chapters: 1-5
Boundary element plate formulations for dynamic fracture and ultrasonic guided-wave structural health monitoring In this thesis, new boundary element formulations based on first-order plate theories are developed for dynamic …
Format: a:2:{s:5:"value";s:7:"Ms Word";s:5:"label";s:7:"Ms Word";} |
Pages: 100 |
Price: ₦5,000 |
Chapters: 1-5
Boundary layer receptivity to freestream disturbances Transition of fluid flow from a laminar to turbulent state has been studied extensively for over a century, beginning with experiments carried out …
Format: a:2:{s:5:"value";s:7:"Ms Word";s:5:"label";s:7:"Ms Word";} |
Pages: 100 |
Price: ₦5,000 |
Chapters: 1-5
Carbon fibre laminates with engineered fracture behaviour A new bio-inspired microstructure design approach was developed to improve the translaminar toughness and damage tolerance of Carbon Fibre Reinforced Plastic (CFRP) …
Format: a:2:{s:5:"value";s:7:"Ms Word";s:5:"label";s:7:"Ms Word";} |
Pages: 100 |
Price: ₦5,000 |
Chapters: 1-5
Carbon nanoparticle reinforced polymer composites Theoretically, covalent functionalised carbon nanotubes (f-CNTs) are supposed to be effective reinforcement fillers to improve the mechanical properties of the brittle epoxy in a …
Format: a:2:{s:5:"value";s:7:"Ms Word";s:5:"label";s:7:"Ms Word";} |
Pages: 100 |
Price: ₦5,000 |
Chapters: 1-5
Cellulose nanopaper as reinforcement for sustainable polymer composites The use of cellulose nanopapers as reinforcement to produce high performance polymer composites is investigated in this thesis. Cellulose nanopapers are …
Format: a:2:{s:5:"value";s:7:"Ms Word";s:5:"label";s:7:"Ms Word";} |
Pages: 100 |
Price: ₦5,000 |
Chapters: 1-5
Cellulose nanopaper as two-dimensional reinforcement for polymers This thesis investigates the use of cellulose nanopaper as two-dimensional reinforcement for polymers. It was found that the introduction of bacterial cellulose …
Format: a:2:{s:5:"value";s:7:"Ms Word";s:5:"label";s:7:"Ms Word";} |
Pages: 100 |
Price: ₦5,000 |
Chapters: 1-5
Characterisation and estimation of the flow over a forward-facing step The turbulent flow over a forward-facing step is studied using two-dimensional time-resolved Particle Image Velocimetry and simultaneously sampled wall-pressure …
Format: a:2:{s:5:"value";s:7:"Ms Word";s:5:"label";s:7:"Ms Word";} |
Pages: 100 |
Price: ₦5,000 |
Chapters: 1-5
Characterisation of fibre hybrid thermosetting composites for automotive applications The objective of the research presented in this PhD thesis is to improve the understanding of the failure modes and …
Format: a:2:{s:5:"value";s:7:"Ms Word";s:5:"label";s:7:"Ms Word";} |
Pages: 100 |
Price: ₦5,000 |
Chapters: 1-5
Coherent structures and transient amplification mechanisms in transitional and turbulent flows In this thesis, a generic explanation for coherent structures based on the filtering properties of the linearised Navier-Stokes …
Format: a:2:{s:5:"value";s:7:"Ms Word";s:5:"label";s:7:"Ms Word";} |
Pages: 100 |
Price: ₦5,000 |
Chapters: 1-5
Coherent structures in high-reynolds number wall-bounded turbulence: invariant solutions and scale interaction This work seeks to address some of the outstanding issues in the theoretical description of high-Reynolds number …
Format: a:2:{s:5:"value";s:7:"Ms Word";s:5:"label";s:7:"Ms Word";} |
Pages: 100 |
Price: ₦5,000 |
Chapters: 1-5
Composites with Controllable Stiffness High performance carbon fibre reinforced composites with controllable stiffness could revolutionise the use of composite materials in structural applications. Described here are structural materials, the …
Format: a:2:{s:5:"value";s:7:"Ms Word";s:5:"label";s:7:"Ms Word";} |
Pages: 1000 |
Price: ₦5,000 |
Chapters: 1-5
Bio-inspired micro-structural design for CFRP: exploring damage mechanisms of nacre Carbon-Fibre Reinforced Polymers (CFRP) are widely regarded as the material of choice for many aerospace and automotive applications, where …
Format: a:2:{s:5:"value";s:7:"Ms Word";s:5:"label";s:7:"Ms Word";} |
Pages: 100 |
Price: ₦5,000 |
Chapters: 1-5
Computational analysis and mitigation of micro-pressure waves in high-speed train tunnels Tunnels are increasingly used in high-speed rail projects to mitigate against issues such as environmental noise, land disputes, …
Format: a:2:{s:5:"value";s:7:"Ms Word";s:5:"label";s:7:"Ms Word";} |
Pages: 100 |
Price: ₦5,000 |
Chapters: 1-5
Blockage tolerant wind tunnel testing of aerofoils at angles of incidence from 0 to 360 degrees, with respect to the self-start of vertical-axis wind turbines The need for better …
Format: a:2:{s:5:"value";s:7:"Ms Word";s:5:"label";s:7:"Ms Word";} |
Pages: 100 |
Price: ₦5,000 |
Chapters: 1-5
Computational modelling of airflow and transport in the upper respiratory tract This thesis comprises an investigation of the dynamics of airflow in the upper respiratory tract from the nose …
Format: a:2:{s:5:"value";s:7:"Ms Word";s:5:"label";s:7:"Ms Word";} |
Pages: 100 |
Price: ₦5,000 |
Chapters: 1-5
Boundary Element Method for Fast Solution of Acoustic Problems: Active and Passive Noise Control This thesis presents boundary element formulations for three-dimensional acoustic problems of active (ANC) and passive …
Format: a:2:{s:5:"value";s:7:"Ms Word";s:5:"label";s:7:"Ms Word";} |
Pages: 100 |
Price: ₦5,000 |
Chapters: 1-5
A boundary element method for modelling piezoelectric transducer based structural health monitoring In this thesis, several numerical approaches for the development of structural health monitoring (SHM) methodologies for engineering …
Format: a:2:{s:5:"value";s:7:"Ms Word";s:5:"label";s:7:"Ms Word";} |
Pages: 100 |
Price: ₦5,000 |
Chapters: 1-5
Boundary element methods for cohesive thermo-mechanical damage and micro-cracking evolution In this thesis, Boundary Element Methods (BEM) are developed for micro-mechanic cohesive non linear problems. Modelling of intergranular and …
Format: a:2:{s:5:"value";s:7:"Ms Word";s:5:"label";s:7:"Ms Word";} |
Pages: 100 |
Price: ₦5,000 |
Chapters: 1-5
Behaviour of high Mach number boundary layers with sudden pressure gradient changes Hypersonic airbreathing propulsion has been under research since the mid 1960s and will continue to be of …
Format: a:2:{s:5:"value";s:7:"Ms Word";s:5:"label";s:7:"Ms Word";} |
Pages: 100 |
Price: ₦5,000 |
Chapters: 1-5
Bio-inspired designs for enhanced damage resistance of composite structures: Bouligand, Herringbone and multi-tailored bone-inspired strategies This thesis presents three novel bio-inspired microstructural concepts, for point-by-point tailorable composite solutions, that …
Format: Ms Word |
Pages: 100 |
Price: ₦3000 |
Chapters: 1-5
NUMERICAL INSIGHTS OF FLUID-THERMAL CHARACTERISTICS IN A HYBRID MICROJET LIQUID COOLED HEAT SINK ABSTRACT In the current era of immense technological advancement, most of the systems are automated …
