Category: CHEMICAL ENGINEERING TOPICS AND MATERIALS

Application of Membrane Separation Processes in the Pharmaceutical Industry – A Study of Process Development for Overcoming Membrane Limitations The prevalent business model in the pharmaceutical industry requires rapid …

3D Nanotemplates for Protein Crystallisation This thesis presents the first experimental investigations into the combined effect of nanoscale surface porosity, narrow pore size distribution and surface chemistry, on nucleation …

Adsorptive cellulose membranes for fluid separation One of the drawbacks of current solvent stable nanofiltration membranes is environmentally harsh preparation methods which are being used to improve the stability …

Advanced fluidised bed gasification for carbon capture and fuel cell applications The rapid global economic and population growth requires consistent supply of energy. Gasification is a promising technology for …

Advanced physical characterisation of milled pharmaceutical solids Milling has been the key unit operation in controlling particle size of pharmaceutical powders at scale. The work carried out in this …

Advances in Experimental Methods for Characterisation of Porous Solids This thesis describes work on the development of new integrated methods for the characterisation of porous media. Porous media are …

Algorithms and Tools for Feasibility Analysis and Optimal Experiment Design in Pharmaceutical Manufacturing The growing need for systematic and risk-based approaches to tackling challenges within the process industry has, …

Amino acid metabolism in Chinese hamster ovary cell culture The present thesis focuses on amino acids (a.a.) and their metabolism by Chinese hamster ovary cells, the workhorse of the …

ANAEROBIC MEMBRANE BIOREACTOR TECHNOLOGY FOR SOLID WASTE STABILIZATION In this study, a simulated Organic Fraction of Municipal Solid Waste (OFMSW) was treated in an anaerobic two-stage membrane process. The …

Analysis of Blood Flow in Patient-specific Models of Type B Aortic Dissection Aortic dissection is the most common acute catastrophic event affecting the aorta. The majority of patients presenting …

Analysis of morphological and blood flow characteristics of the human thoracic aorta The human aorta is often affected by many cardiovascular diseases, including atherosclerosis, aneurysm and dissection. There is …

Analysis of the phase behaviour of a nano-confined Lennard-Jones fluid using a pseudo-spectral approach to classical density-functional models Wetting phenomena provide a vivid manifestation of attractive intermolecular forces, putting …

The application of colloidal liquid aphrons for drug delivery Colloidal Liquid Aphrons (CLAs) have been used in a variety of applications ranging from detergency and solute extraction, to enzyme …

Application of in-situ IR spectroscopy for the evaluation of new palladium based catalysts for the hydrogenation of anthraquinone The anthraquinone process is the most important method in the manufacture …

PRODUCTION OF ALKALI USING LOCAL RAW MATERIAL (PALM INFORESCENCE) TABLE CONTENTS Title Page———i Certification——–ii Dedication———iii Acknowledgement——-iv Abstract ———vi Table of Content——–vii   Chapter One 1.0 Introduction ——-1 1.1 Statement of Problem——4 1.2 Purpose of the Study——5 1.3 Significance of Study——8 1.4 …

PRODUCTION OF WOOD ADHESIVE TABLE CONTENTS Title Page———i Certification——–ii Dedication———iii Acknowledgement——-iv Abstract ———vi Table of Content——–vii   Chapter One 1.0 Introduction ——-1 1.1 Statement of Problem——4 1.2 Purpose of the Study——5 1.3 Significance of Study——8 1.4 Limitation——–9 1.5 Scope of Study——-11   Chapter Two 2.0 Review of …

PRODUCTION OF BLACK AND BROWN POLISH BROWN POLISH TABLE CONTENTS Title Page———i Certification——–ii Dedication———iii Acknowledgement——-iv Abstract ———vi Table of Content——–vii   Chapter One 1.0 Introduction ——-1 1.1 Statement of Problem——4 1.2 Purpose of the Study——5 1.3 Significance of Study——8 1.4 Limitation——–9 …